2. Press to enter the time setting, you will set in sequence for
12/24H > Hour > Minute > Year > Month > Date
5. Then “Minute” is flashing, press to select value. Press and next.
Time Setting (by device buttons)
1. Press to turn on AUTO DST, it’s for daylight saving time area.
If you don’t need it, just ignore this step.
4. The “Hour” is flashing, press to select value. Press and next.
6. Then “Year” is flashing, press to select value. Press and next.
7. Then “Month” is flashing, press to select value. Press and next.
8. Then “Date” is flashing, press to select value.
Press to finish time setting.
Note: You don’t have to set the day of the week. It’s calculated automatically.
When you turn on Auto DST, time will auto adjust on March and November.
If you don’t need auto DST, please turn if off.
11
3. The “12/24H” is flashing, press to select value. Press and next.
To Next Page
Loading...
