Page 20
ENGLISH
Jandy
®
Pro Series JE Heat Pumps
|
Installation and Operation Manual
The User Setup options allow the user to select specific
Languages, Temperature Scale, Spa Timer, and Display
Light options.
1. Make sure the control is in the
mode.
2. To enter the User Setup mode, press and hold the
button for 5 seconds.
The display will revert back to after one
minute since the last key press.
3. To select a language, use the or button
to display
.
Press the button. The
(default language)
appears, use the or button to scroll
through the language options. When you reach the
desired language, press the button to select
the language. Press or to exit the
User Setup mode.
1. Make sure the control is in the
mode.
2. To enter the User Setup mode, press and hold the
button for 5 seconds.
3. To select temperature scale, use the
or
button to scroll through to display
. Press
the button. The
(default temperature scale) appears, use the
or button to scroll through the scale
options.When you reach the desired temperature
scale, press the button to select. Press
or to exit the User Setup mode.
1. Make sure the control is in the
mode.
2. To enter the User Setup mode, press and hold the
button for 5 seconds.
3. To select spa timer, use the
or button to
scroll through to display
.Press the button. The
(default
spa timer setting)
is displayed. To turn the spa
on or off indenitely, press the button to
select.
To select the length of time for the spa to run,
use the
or button to scroll to display
.Press
the button to select.The display
(default time setting) is
displayed. Use the or button to select
the length of time for the spa to run (between
00:15 to 23:00 hours incremented by 00:15
minutes). Press the button to select how
long the spa will run. Press or to exit
the User Setup mode.
1. Make sure the control is in the
mode.
2. To enter the User Setup mode, press and hold the
button for 5 seconds.
3. To select display light setup, use the
or
button to scroll through to display
. Press the
button. The
(default display light setting)is
displayed. This option allows the display light to
turn off after 2 minutes. Press the button
to select. Use the
or button to scroll
to display
, this option allows the display light to turn
off, press the button to select. Use the
or button to scroll to display
,this option allows
the display light to turn on, press the
button to select. Press or to exit the
User Setup mode.
To Next Page
Loading...
Need help?
General
