janitza UMG 511 - Table of Contents

Contents
General 3
Modbus 4
Modbus functions (master) 4
Modbus Functions (Slave) 4
Transfer parameters 5
Byte sequence 5
Update rate 5
Number formats 5
Symbols and definitions 5
Explanations of the measured values 6
Address list 12
Frequently required readings 12
Date and time 13
Messwerte (200ms Messfenster) 14
Mean values (float type) 18
Minimum values (float type) 22
Maximum values (float type) 24
Averaging time 28
Minimum values time stamp 32
Maximum values time stamp 34
Maximum values of mean values (float type) 40
Other values 44
Energy 52
EMAX 54
FFT fourier analysis 66