Janome Elna Lotus - Key position adjustment

JanomeFlyer.com
21
•Keypositionadjustment
You can adjust the key position when you think the
key sensor is off from the actual key position.
z Enter the setting mode. Press the thread cutter
button twice to enter the key position adjustment.
x The key position adjustment screen appears and
“P1” is shown on the right side of the screen. With
a buttonhole opener, press q on the touch panel
of your machine.
1 2 3
4
5
x
c
v
b
n
m
c “P2” will be shown on the LCD display. Press the w
on the touch panel.
v “P3” will be shown on the LCD display. Press the e
on the touch panel.
b “P4” will be shown on the LCD display. Press the r
on the touch panel.
n “P5” will be shown on the LCD display. Press the t
on the touch panel.
m The screen will back to the setting screen with a
buzzer sound. Press the auto-lock button to apply
the adjustment.
z
Elna Lotus Sewing Machine Instruction Manual
www.janomeflyer.com
Lotus Owners Manual/ User Guide