35
AttachingElastic
q Stitch pattern: 14
w Needle thread tension: 3 to 7
e Presser foot: Satin stitch foot F
* Stitch pattern 06 can also be used.
Mark the elastic into quarters. Match those to the center
front, center back and side seams, and pin the elastic to
the fabric.
Place the elastic under the foot and stitch into place while
stretch the elastic evenly.
Scallop edges
q Stitch pattern: 15
w Needle thread tension: 3 to 6
e Presser foot: Satin stitch foot F
Attractively finish edges of collars, pockets and placemats.
Select 15.
Attach satin stitch foot F.
To edge a collar, place interfacing/stabilizer between
upper and under collar and sew scallop on seam line.
After sewing, trim fabric close to stitch taking care not to
cut scallops.
Bridging(Fagoting)
q Stitch pattern: 13
w Needle thread tension: 3 to 6
e Presser foot: Satin stitch foot F
Two folded edges are joined together by threads over an
open area. Use linen, cotton or blend of linen/cotton.
Select 013.
Attach satin stitch foot F.
Thread machine, needle and bobbin with fine embroidery
thread (50 weight or finer).
Use spray starch to stabilize fabric.
Fold and press under seam allowance to wrong side of
fabric. Baste folded edges of fabric on top of thin paper
or water-soluble stabilizer q. Center stitching over the
paper/fabric. Lower the presser foot. Sew, catching the
folded edges of fabric.
Remove paper or wash away stabilizer and basting
stitches.
q
q w e
q w e
q w e
To Next Page
Loading...
