15
ThreadingtheMachine
Raise the presser foot. Press the needle up/down button
q to raise the thread take-up lever to its highest position.
q Needle up/down button
CAUTION:
Turn OFF the power switch before threading the
machine.
•Threadingthemachine
z Turn the spool thread guide w in the direction of
arrow as illustrated.
Pass the end of the thread through the spool
thread guide w.
x Pass the thread through the thread guide (A) e.
q
w
z
x
c
v
b
z x
c v
b n
e
r
t
y
n
m
u
i
c Draw the thread around the thread guide (B) r.
v Draw the end of the thread down around the check
spring holder t.
t Check spring holder
b Firmly draw the thread up from right to left over the
take-up lever, and down into the take-up lever eye
y.
n Pass the thread through the lower thread guide
u. Slide the thread behind the needle bar thread
guide on the left i.
m Thread the needle from front to back, or use the
needle threader (see page 16).
m