36
ClassicSquareButtonhole
q Stitch pattern: 16
w Needle thread tension: 1 to 5
e Presser foot: Automatic buttonhole foot R
r Buttonhole lever sign
•Tosew
z Press the needle up/down button to raise the needle.
Attach the automatic buttonhole foot R snapping the
pin w into the groove q of the foot holder.
q Groove
w Pin
NOTES:
•Thesizeofabuttonholeisautomaticallyset
by placing a button in the rear of the automatic
buttonhole foot R.
•Thebuttonholderofthefoottakesabuttonsizeof
up to 1˝ (2.5 cm) in diameter.
•Itissometimesnecessarytochangebuttonhole
size to match certain heavy or specific materials
and threads.
•Makeatestbuttonholeonanextrapieceofthe
fabric to check your setting.
•Placethebuttononthefabricandmarkthetopand
bottom to determine the position of the buttonhole
on the fabric.
•Useaninterfacingonstretchfabrics.
VariousKindsofButtonholesandTheirUses
16ClassicSquareButtonhole
The most common buttonhole, found on blouses, shirts,
pants, etc. It consists of a bartack at each end and a
compact zigzag stitch along each side.
17ClassicKeyholeButtonhole
Accommodates the shank found on large buttons used
on heavy coats and jackets.
q w e r
q
w
z