39
•Adjustingthestitchdensity
Press the stitch length adjustment button q to change
the stitch density.
Press the “ ” button to make the buttonhole stitch
denser w.
Press the “ ” button to make the buttonhole stitch
less dense e.
The stitch density can be varied from 0.3 to 0.8
depending on the selected buttonhole.
The default setting is “0.4”.
•Adjustingthestitchwidth
Press the stitch width adjustment key q to change the
stitch width.
Press the “ ” button to decrease buttonhole width w.
Press the “ ” button to increase buttonhole width e.
The stitch width can be varied from 2.5 to 7.0
depending on the selected buttonhole.
The default setting is “5.0”.
AdjustingtheStitchWidthandDensityfor
Buttonholes
q
q
w e
w
e
To Next Page
Loading...
