13
Threading the Machine
Press the needle up/down button to raise the take-up lever
to the highest position.
Press the lockout key to lockout the machine. The presser
foot will go down and the upper thread tension disks will
open.
q Lockout key
Pass the thread in the order from z to m.
z Hold the thread with both hands and pass the thread
into the guide slot.
w Guide slot
x Draw the thread to the left and around the corner of
the guide toward you.
Pull the thread along the right channel.
e Corner of the guide
r Right channel
c Draw the thread down along the right channel and
around the bottom of the thread guide plate.
Pull the thread up along the left channel.
r Right channel
t Thread guide plate
y Left channel
v While holding the thread at the spool, firmly draw the
thread up and to the back of the take-up lever. Draw
the thread forward to draw it into the eye of the take-up
lever.
u Eye of the take-up lever
b Then pull the thread down along the left channel
and through the lower thread guide.
i Lower thread guide
n Slide the thread behind the needle bar thread guide
from the left.
o Needle bar thread guide
m Thread the needle with the needle threader (refer to
the next page).
z
x
q
c
v
b
m
n
x
c
v
b
m
n
e
w
z
r
r
t
y
u
o
i
To Next Page
Loading...
