14
Needle threader
NOTE:
The needle threader can be used with a #11 to #16
needle.
Thread size 50 to 90 is recommended.
Make sure the machine is locked out.
z Pull down the needle threader knob as far as it will go.
The threader hook comes out through the needle eye
from behind.
q Threader knob
w Threader hook
x Draw the thread from the left to the right, under the left
guide, threader hook and right guide.
Draw the thread around the right guide toward you.
e Left guide
r Right guide
c Raise the threader slowly so a loop of the thread is
pulled up through the needle eye.
t Thread loop
v Pull the thread loop to take the thread end out through
the needle eye to the rear.
NOTE:
The needle threader cannot be used with the twin needle.
z
r
x
c
v
e
q
w
t
To Next Page
Loading...
