Janome JPU-1004 - Page 34

(JPU-3004 – JPU-8004)
Connect the cables according to the following wiring diagram.
Control Box (Front)
Encoder Output (Optional)
Ethernet Output (Optional)
LAN, etc.
Analog Output
Load Cell Output (Optional)
Switch Box
Area Sensor
I/O-S
PC
COM (RS-232C)
External Device
(Sequencer, etc.)
I/O-SYS
I/O-1 (Optional)
External Device
Pulse Output
Monitor Box
Select
Teaching
Pendant
Setup Electro Press JP Series 4 23