EasyManua.ls Logo

Janome MB-4 - Setting Fabric in Embroidery Hoop

Janome MB-4
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AAASewing.com
21
Threading the needle with the needle threader
z Hold the needle threader with a triangle mark facing
up. Insert the thread into the Y-notch of the threader
from the right.
q Triangle mark
w Y-notch
x Slide the threader down along the needle while
pushing it gently until the threader pin goes into
the needle eye.
Place the V-notch over the needle just above the
needle eye.
e V-notch
c Push the threader until the threader pin comes out
through the needle eye with a loop of thread.
r Threader pin
v Remove the threader from the needle slowly,
leaving the thread loop behind the needle eye.
Using the tweezers, pull the loop of the thread out
to the back.
t Tweezers
q
w
e
r
z
x
c
v
t
Janome MB4 Embroidery Machine Instruction Manual
www.aaasewing.com
MB4 Owners Manual/ User Guide

Table of Contents

Other manuals for Janome MB-4

Related product manuals