Janome MC400E - Replacing External Parts (1) Face Cover and Thread Cutter Cover; Replacing the face cover; Replacing the thread cutter cover

1
MC450e
Replacing External Parts (1) Face Cover and Thread Cutter Cover
Replacing the face cover
To remove:
1. Remove the setscrew and remove the face cover.
To attach:
2. Follow the above procedure in reverse.
Face cover
Setscrew
Replacing the thread cutter cover
To remove:
1. Remove the cap and setscrew (A).
Stand the machine so the handwheel side comes to
the underside of the machine.
Insert the screwdriver from the bottom hole of the
thread cutter cover.
Loosen the setscrew (B).
Remove the thread cutter cover.
To attach:
2. Follow the above procedure in reverse.
Cap
Setscrew (A)
Thread cutter cover
Setscrew (B)