31
MC450e
Oiling the Machine (1)
Move the carriage to the home position and turn off the power switch and/or unplug the machine before oiling the
machine.
• Wait until the motor cools down before oiling.
• Do not oil any parts other than as explained in this section.
• Use good quality sewing machine oil.
• One or two drops of oil is sufcient.
• Remove excess oil, otherwise it may stain fabric.
Remove the face cover (refer to page 1).
Oil the arrow points as indicated in the illustration.
Needle bar
Presser bar
Thread take-up
lever
Oil the needle bar, presser bar and thread take-up lever
To Next Page
Loading...
