Janome MC400E - Replacing External Parts (3) Bed Cover; Replacing the bed cover

3
MC450e
Setscrew (A) Setscrew (A)
Needle plate
Bed cover
Rear cover Hook
Hook
Hook
Rear cover
Bed cover
Replacing External Parts (3) Bed Cover
Replacing the bed cover
To remove:
1. Turn the power switch on to move the carriage to the
stored position, then turn the power switch off.
2. Remove the setscrews (A) and the needle plate.
Remove the base plate (refer to page 2).
3. Remove the bed cover while pushing the rear cover
to unlock the hooks.
To attach:
4. Follow the above procedure in reverse.