30
Press the “ ” sign on the stitch width adjusting key to
move the needle bar to the right.
Press the “ ” sign on the stitch width adjusting key to
move the needle bar to the left.
Adjusting the Stitch Length
The stitch length can be altered by pressing the stitch
length adjusting key.
The stitch length indication will change as the key is
pressed.
Press the “ ” sign on the key to increase the stitch
length.
Press the “ ” sign on the key to decrease the stitch
length.
Adjusting the Needle Drop Position
The needle drop position of the straight stitches can be
altered by pressing the stitch width adjusting key.
4.5 9.00.0
The needle drop position can be adjusted for following
straight stitch patterns:
5.01.0 2.4
MODE 1:
MODE 2:
To Next Page
Loading...
