78
Reducing the size of letters
To reduce the height of character to approximately 2/3 of
its original size, select the character with the cursor key
and press “ ” of the stitch width adjusting key.
NOTE:
The size of 9 mm monogram (MODE 6) cannot be
reduced.
A
2/3
A
Spacing
To enter the space in monogramming, select the stitch
pattern 97, 98 or 99 in MODE 3, 4, 5 or 6.
q Pattern 97: Small-size space (2.5 mm)
w Pattern 98: Medium-size space (3.5 mm)
e Pattern 99: Large-size space (5.0 mm)
Monogram size
The stitch width of monogramming does not indicate the
actual size of character. That is an overall height including
before-edge and after-edge. To sew monogramming of
full 9 mm height (uppercase alphabet only), press MODE
key 5 times to enter MODE 6.
q Before-edge
w After-edge
A a j y
Ё
1 2
9.0 mm
q
w
q
w
e
To Next Page
Loading...
