37
Rolled Hem
Machine settings
q Pattern: MODE 1: 01
w Thread tension: AUTO
e Presser foot: Rolled hem foot D
r Foot pressure: 5
Sewing
z Fold the edge of the fabric twice, 6 cm (2 - 3/8˝) in
length and 0.3 cm (1/8˝) in width.
q 6 cm (2 - 3/8˝)
w 0.3 cm (1/8˝)
x Place the fabric aligning the edge of the hem with the
guide on the foot.
Lower the foot and sew 1-2 cm (1/2˝-1˝) while pulling
both thread to the back.
e Threads
c Stop the machine and lower the needle into the fabric.
Raise the foot and insert the folded portion of the
fabric into the curl of the foot.
Lower the foot, and then sew by lifting up the edge of
the fabric to keep it feeding smoothly and evenly.
r Curl of the foot
NOTE:
Trim the corner 0.6 cm (1/4˝) to reduce bulk.
t 0.6 cm (1/4˝)
q
w
r
0.6 cm
0.6 cm
q
e
w
r
z
x
c
e
t
To Next Page
Loading...
