Janome MC8200QC - Twin Needle Sewing Adjustments

67
Satin Stitches
Machine settings
q Pattern: MODE 1: 68–79
w Thread tension: AUTO
e Presser foot: Satin stitch foot F
r Foot pressure: 5
q
e
w
r
−
Patterns 68–79 can be elongated up to 5 times their
original length while the stitch density remains the same.
Elongation ratio
Example: Pattern number 70 (MODE 1)
Select pattern number 70 (MODE 1).
Press the elongation key to select the desired elongation
ratio.
Elongation ratio is indicated in multiples of the original
pattern length; L1 (original length) to L5.
q Elongation key
w Elongation ratio
The stitch length and width can also be changed.
q
L1 L2 L3 L4 L5
Hand-look Quilt Stitches
Machine settings
q Pattern: MODE 2: 35, 36
w Thread tension: 6–8
e Presser foot: Satin stitch foot F
r Foot pressure: 5
q
e
w
r
Patterns 35 and 36 in MODE 2 are special stitches for
quilting which look like hand sewn stitches.
Use a transparent nylon thread for the needle and
ordinary sewing thread for the bobbin.
The bobbin thread is pulled up on the right side of the
fabric and the stitches look as if they were sewn by hand.
w