Janome MC8200QC - Monogramming Functionality; Selecting Characters for Monograms; Programming and Sewing Monograms

75
Bridge Stitches
Stitch patterns number 37 to 41 (MODE 2) are bridge
stitches, which are used to insert straight stitches after a
stitch pattern.
Example: Combination of pattern 47 (MODE 1) and
pattern 39 (MODE 2).
z Select pattern 47 (MODE 1).
x Press the memory key.
c Select pattern 39 (MODE 2).
v Press the memory key.
q
NOTE:
The number on the right of the stitch image indicates
stitch counts to be inserted.
The stitch length and needle drop position of patterns
37, 38 and 40 in MODE 2 are independent from those
of the combined pattern.
Patterns 39 and 41 in MODE 2 will inherit the stitch
length and needle drop position of a previous pattern
in the programmed pattern combination.
Use patterns 37 or 38 in MODE 2 with satin stitches.
q Pattern 37
w Pattern 38
Use pattern 40 in MODE 2 if you wish to add straight
stretch stitches.
z
x
c
b Start sewing.
Two counts of the straight stitch are added to pattern
47.
q Bridge stitch
v
b
wq
NOTE:
The bridge stitches number 39 and 41 (MODE 2)
cannot be selected individually.
Insert the bridge stitches after a stitch pattern.