Janome MC8200QC - CARE AND MAINTENANCE; Cleaning the Hook Area Regularly

82
Individual Stitch Adjustment
The stitch width and length can be individually adjusted
for each pattern in a programmed combination.
Example: Changing the stitch width of the one pattern in
the combination
NOTE:
To view the stitch settings of each pattern, shift the
cursor under the desired pattern then press the stitch
width or length adjusting key. The settings will be
displayed at the bottom of the LCD screen.
If you press the stitch width or length adjusting key
when the cursor is to the right of the last programmed
pattern, individual adjustments will be cancelled and
uniform adjustment will be applied.
z
Select pattern 70 (
MODE
1).
Press the memory key.
x
Press the memory key again.
c Press the cursor key to shift the cursor under the
second pattern.
v Press the stitch width adjusting key to adjust the width
to “3.5”.
b Press the start/stop button.
The machine will sew the pattern combination.
The stitch width of the second pattern in the
combination is adjusted.
c
v
b
x
z