103
3.5
2.20
4.2
DefaultCancel
OK
8
7
6
A Z
Adjust
Knit
Woven
Straight Stitch
Locking
StitchLock-a-Matic
A
Auto
1
2
9
Adjust
1
2
9
5
4
3
Seaming
When you press the Seaming key, the
Seaming window will appear.
In the Seaming window, the straight stitch of
center needle position with the stitch length
2.2 mm (3/32˝) will be automatically selected.
In the Seaming Mode you may select the
following stitches:
(1) Straight Stitch for woven fabrics
(2) Stretch Stitch for elastic fabrics
(3) Lock-a-Matic Stitch
(4) Locking Stitch
Function keys:
1
Needle Up/Down Key: Press the key
to set the needle position up or down
when stopping the machine.
2
Adjust Key: Press the key to open
the Manual Setting window.
3
Needle Drop Position: Press the Needle
Drop Position or keys to change
the needle drop position.
4
Stitch Length: Press the Stitch Length
or keys to increase/decrease the
stitch length.
5
Thread Tension: Press the Thread Tension
or keys to increase/decrease the
thread tension.
6
Default key: When you press the key,
all function values on the screen will
return to the default settings (the same
settings as when you purchased the
machine).
7
Cancel key: When you press key,
the adjust window will close and the
setting remains.
8
OK key: Press key. The setting is
registered and the screen returns to the
previous window.
9
Return key: Press this key to return to the
initial Sewing Application window.
Default
Cancel
OK
Adjust
To Next Page
Loading...
