74
Adjust
32 33 34 35 36
37 38 39 40 41
42 43 44
1/2
Cording
F
Auto
A Z
7.0
0.40
2.2
1
Default
Cancel
OK
X
Adjust
e
1
2
1
2
3
46
5
7
8
9
Press Satin Stitch Key in the Ordinary Sewing
Mode to open the Satin Stitch Window.
Function Keys:
1
Needle Up/Down Key: Press the Needle
Up/Down key to set the needle position up
or down when stopping the machine.
2
Adjust Key: Press the Adjust key to open
the Adjusting window.
3
Zigzag Width: Press the Zigzag Width
or keys to change the stitch
widths.
4
Stitch Length: Press the Stitch Length
or keys to increase/decrease the
stitch length.
5
Elongation Key: The Elongation key is
used to change the elongation of decorative
stitch patterns.
6
Thread Tension: Press the Thread Tension
or keys to increase/decrease the
thread tension.
7
Default Key: When you press the key,
all settings in the adjusting window will
return to default (the same settings as
when you purchased the machine).
8
Cancel Key: When you press key,
the adjusting window will close and the
setting remains.
9
OK Key: Press key. The setting is
registered and the screen returns to the
previous window.
Satin Stitches
Default
Cancel
OK
To Next Page
Loading...
