24
Pressure Dial
The Pressure Dial should be set at “3” for
regular sewing.
Reduce the pressure to “2” for applique, cut
work, drawn work, basting and embroidery.
Set the pressure to “1” when sewing
chiffon, lace, organdy and other fine fabrics.
Velour and knits with a lot of stretch may
also require a “1” setting.
Turn the Pressure Dial and set the
desired number at the Setting Mark.
1Pressure Dial
2 Setting Mark
To Lower or Raise the Feed Dog
Manually - Drop Feed Lever:
To lower the Feed Dog, slide the Drop Feed
Lever in the direction of Arrow.
To raise the Feed Dog, slide the Drop Feed
Lever in the direction of Arrow.
1 Drop Feed Lever
2 Lowered Position
3 Raised Position
Automatic - My Setting:
To lower the Feed Dog, press the SET key
and Ordinary Sewing key, then press the
key.
(See page 28)
To raise the Feed Dog, press the SET key
and Ordinary Sewing key, then press the
key.
(See page 28)
NOTE:
• The Feed Dog lowers automatically when
the Embroidery Mode is selected.
1
2
1
2
3
To Next Page
Loading...
