121
Setting the fabric in an embroidery hoop
1Mark the Centerlines on the right side of
the fabric with tailor’s chalk.
1Centerlines
2 Loosen the Hoop Tightening Screw.
2 Hoop Tightening Screw
3 Lay the Inner Hoop e and the Template
over the fabric with a Stabilizer attached,
matching centerlines.
3 Inner Hoop
4Template
5Stabilizer
4 Set the Inner Hoop e into the Outer Hoop
so the fabric and the template will not
move.
6Outer Hoop
5Tighten the Hoop Tightening Screw to
secure the fabric.
6 Remove the Template.
NOTES:
• When placing the fabric on the Embroidery
Hoop, place the outer hoop on a flat
surface.
• Use the Clothsetter, an optional item, to
set the fabric into the correct position in the
hoop.
1
4
3
5
6
2
2
1
2
3
4
5
6
To Next Page
Loading...
