18
BOARD C ATTACHING AND REMOVING
To remove:
1. Remove the front panel unit (see page 4).
2. Loosen screws (A). (B), (C) and (D), and remove screws (E) and (F).
3. Remove the rear cover.
4. Pull out the 4 connectors and remove screws (G).
5. Remove board C.
To attach:
6. Attach board C with 3 screws and insert the connectors.
7. Attach the rear cover with 6 screws.
8. Attach the front panel unit.
To Next Page
Loading...
