Janome Memory Craft 3500 - Boards F and K Attachment and Removal; Board K; Board F

BOARDS F AND K ATTACHING AND REMOVING
Board K
To remove:
1. Remove the front panel unit (see page 4).
2. Remove the 9 screws.
3. Pull out the connector from board F and remove board K.
To attach:
4. Follow the above procedure in reverse.
Board F
To remove:
1. Remove the front panel unit (see page 4).
2. Pull out the connector from board F. Remove 2 screws and board F,
To attach:
3. Follow the above procedure in reverse.
24