Janome Memory Craft 9450QCP - Touch Panel Keys and Navigation; Touch Panel Key Functions

16
q
w
e
r t r
q Open le key (refer to pages 69, 84)
Press this key and the open le window will open.
You can open pattern combinations and monograms
saved in the machine’s internal memory or on a USB ash
drive.
w Set mode key (refer to page 105)
Press this key to enter the setting mode. You can
customize the machine settings to your preference.
The machine settings for Common Settings, Ordinary
Sewing and Choose Language are available in this mode
e Lockout key
Press this key to lockout the machine when threading the
machine, replacing the accessories etc.
To reduce the risk of injury, all the buttons except the lock
key and presser foot lifter button are deactivated.
To unlock the machine, press this key again.
r Page keys
Press the page key to display the next page or previous
page. Press and hold the page key to turn the pages
continuously.
t Touch bar
Press on the bar and slide to the right or left to display the
next page or previous page.
Touch Panel Keys
CAUTION:
Do not press the touch panel or visual touch screen
with hard or sharp objects like pencils, screwdrivers
or the like. Use the touch panel stylus included in the
standard accessories.