Janome Memory Craft 9450QCP - Ordinary Sewing Mode Function Keys; Key Functions Explained

32
t
t Sewing applications
You can select the appropriate stitch for a specic sewing
project and fabric type from the designated application in
this category.
q
w e
r
Function Keys in Ordinary Sewing Mode
q Foot-up key
If this option is turned on, the needle stops at the down
position and the presser foot will automatically go up
when the machine stops.
Press this key to turn this option on or off (refer to page
43).
w Twin needle key
Press this key to set the stitch width for twin needle
sewing (refer to page 70).
e Dual feed key
Press this key for dual feed sewing (refer to pages 37-38).
r Startover key
If you stop sewing in the middle of a stitch pattern and
wish to sew the pattern again from the beginning, press
this key before you start sewing.
Press this key once to startover from the beginning of the
current pattern, or press this key twice to startover from
the beginning of the rst pattern of the combination (refer
to page 73).
r
r Monogramming
You can program lettering as well as a combination of
characters.