EasyManua.ls Logo

Janome Memory Craft 9450QCP - Ruler Work Guide

Janome Memory Craft 9450QCP
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
60
B16-B18 Eyelets
Eyelets are used for belt holes, etc.
Attach the satin stitch foot F.
To sew:
Place the garment under the foot and lower the needle to
the starting point.
Sew until the machine stops automatically.
q Starting point
Open the eyelet with an awl, puncher or pointed scissors.
q
To correct the shape of an eyelet:
If the eyelet is open, press the “–” key.
If the eyelet overlaps, press the “+” key.
NOTE:
The shape can be adjusted within S1 to S3 (default
setting is S2).
q
B15 Fly Stitch
The y stitch is a triangle tacking stitch for use on a
zipper y bottom and on the side pockets of men’s pants.
Attach the satin stitch foot F.
To sew:
Place the garment under the foot and lower the needle at
the starting point.
Sew the stitch until the machine stops automatically.
q Starting point

Table of Contents

Related product manuals