Janome MEMORY CRAFT 9500

Other manuals for Janome MEMORY CRAFT 9500

Questions and Answers:

S
smithalanSep 6, 2025
Why are the patterns distorted on my Janome Sewing Machine?
- M
  mackenzieayalaSep 7, 2025
  Distorted patterns on your Janome Sewing Machine may result from: * Using the incorrect presser foot. * The needle thread tension being too light. * The stitch length not being suitable for the fabric. * The feed balancing dial not being properly set. * Not using interfacing for stretch and very fine fabrics; use an interfacing. * A loose embroidery hoop Attaching Knob. * The carriage bumping into something around the machine. * The fabric not being pulled tightly enough on the embroidery hoop. * The fabric being caught or pulled during embroidery; stop the machine and free the fabric.
J
Janet FrancoAug 22, 2025
Why does the needle thread keep breaking on my Janome MEMORY CRAFT 9500 Sewing Machine?
- K
  Katherine CrossAug 22, 2025
  The needle thread may break for several reasons: * The needle thread might not be threaded properly. * The needle thread tension could be too tight. * The needle might be bent or blunt. * The needle might be inserted incorrectly. * The thread might be too heavy for the needle. * The needle thread might not be set in the thread holder when embroidery sewing started.
K
Kathryn VaughnSep 3, 2025
Why is the cloth not feeding smoothly through my Janome MEMORY CRAFT 9500?
- T
  Tamara SmithSep 3, 2025
  The cloth may not feed smoothly due to: * The feed dog being packed with lint. * The presser foot pressure being too weak. * The stitches being too fine; try making stitches coarser. * The fabric not being fed when sewing is starting. * The feed dog being lowered. * The incorrect presser foot being used.
K
Katherine KochSep 2, 2025
Why is my Janome Sewing Machine making strange sounds when I switch it on?
- A
  Amber PaceSep 2, 2025
  If your Janome Sewing Machine makes strange sounds when switched on: * Something may be caught between the carriage and the arm; remove the object. * The carriage may be touching something around the machine.
A
allendavidSep 1, 2025
Why is the cloth not feeding smoothly in my Janome MEMORY CRAFT 9500?
- D
  Daniel SpencerSep 1, 2025
  If the cloth is not feeding smoothly through your Janome Sewing Machine: * The feed dog may be packed with lint. * The presser foot pressure may be too weak. * The stitches may be too fine; make stitches coarser. * The fabric may not be fed when sewing is starting. * The feed dog may be lowered. * The correct presser foot may not be used.
O
owendianeAug 30, 2025
Why is my Janome MEMORY CRAFT 9500 noisy?
- M
  Mrs. Katherine JenningsAug 30, 2025
  If your Janome Sewing Machine is making unusual noises, it could be due to: * Threads caught in the hook mechanism. * The feed dog being packed with lint.
A
Alyssa SchneiderAug 29, 2025
Why does the bobbin thread break on my Janome MEMORY CRAFT 9500?
- E
  elliottlisaAug 29, 2025
  The bobbin thread might break because: * It is not threaded properly in the bobbin holder. * Lint has collected in the bobbin holder. * The bobbin is damaged and doesn’t turn smoothly; in this case, replace the bobbin.
V
Vernon PowersAug 27, 2025
Why does the needle thread break on my Janome MEMORY CRAFT 9500 Sewing Machine?
- D
  danny79Aug 27, 2025
  The needle thread may be breaking due to several reasons: * The needle thread might not be threaded properly. * The needle thread tension could be too tight. * The needle might be bent or blunt. * The needle might be inserted incorrectly. * The thread could be too heavy for the needle. * The needle thread may not have set in the thread holder when you started embroidery sewing.
L
loweryraymondAug 27, 2025
Why does the bobbin thread keep breaking on my Janome Sewing Machine?
- A
  Amy SantosAug 27, 2025
  The bobbin thread may break because: * The bobbin thread is not threaded properly in the bobbin holder. * Lint has collected in the bobbin holder. * The bobbin is damaged and doesn’t turn smoothly. Replace the bobbin.
L
Lawrence JohnsonAug 25, 2025
What to do if my Janome Sewing Machine does not run?
- M
  Monica SalinasAug 25, 2025
  If your Janome Sewing Machine isn't running, check the following: * Ensure the machine is plugged in. * Check for thread caught in the hook race. * If the control circuit isn't working correctly, turn the switch off and on again. * Note that the Start/Stop button is not for ordinary sewing when a foot control is plugged in.

Janome MEMORY CRAFT 9500 Specifications

General

Type	Computerized Sewing and Embroidery Machine
Maximum Stitch Width	7 mm
Maximum Stitch Length	5 mm
Display	LCD Touchscreen
USB Connectivity	Yes
Automatic Needle Threader	Yes
Drop Feed	Yes
Bobbin Type	Horizontal Rotary
Maximum Sewing Speed	820 stitches per minute

Summary

Know Your Machine

Name of Parts

Identifies all parts of the sewing machine and their functions.

Standard Accessories and Storage

Lists and illustrates the included accessories and their storage options.

Extension Table

Details the extension table for free arm and flat-bed sewing operations.

Getting Ready to Sew

Connecting the Power Supply

Instructions for connecting the sewing machine to the power source safely and correctly.

Function Buttons

Explains the purpose and operation of the machine's various function buttons.

Controlling Sewing Speed

Details how to adjust sewing speed using the speed control lever and foot control.

Presser Foot Operations

Guides on how to raise, lower, remove, and attach the presser foot.

Various Presser Feet and Their Uses

Common Presser Feet

Describes versatile presser feet like Zigzag, Overedge, and Zipper feet.

Specialty Sewing Feet

Details specialized feet for Button Sewing, Darning, Embroidery, and Buttonholes.

Winding the Bobbin

Removing the Bobbin

Steps to remove the bobbin from the bobbin holder.

Setting the Spool of Thread

Instructions on placing the thread spool correctly on the spool pin.

Additional Spool Pin

Explains the use of the additional spool pin for specific sewing tasks.

Threading for Bobbin Winding

Inserting the Bobbin

Threading the Machine

Built-in Needle Threader

Drawing Up the Bobbin Thread

Changing Needles

Needle Selection Guide

Table guiding needle type and size based on fabric weight and type.

Thread Tension Adjustment

Auto and Manual Tension Control

Explains automatic tension setting and manual adjustment for optimal stitch balance.

Foot Pressure and Feed Dog Adjustment

Adjusting Foot Pressure

Guides on setting the correct foot pressure for different fabric types and sewing techniques.

Dropping the Feed Dog

Instructions on lowering the feed dog for specific operations like button sewing.

Mode Selection

Mode Selection Keys

Identifies keys for Ordinary Sewing, Embroidery, File Open, Settings, and Help modes.

Setting Mode

Screen and Sound Settings

Adjusts screen contrast, buzzer volume, and eco mode timer for user preference.

Unit and Navigation Settings

Options for setting units, navigating pages, registering settings, and returning to previous screens.

Machine Settings and Adjustments

Covers key position calibration, free arm length, embroidery speed, light, thread selection, memory format, and reset.

Language Selection

Ordinary Sewing Mode

Pattern Selection and Navigation

How to select patterns, use utility stitches, buttonholes, satin, decorative stitches, and monograms.

Straight Stitch Operation

Detailed steps for sewing a straight stitch, including handling thick fabric and changing direction.

Seam Securing and Guides

Techniques for securing seams with reverse stitches and using seam guides for accuracy.

Needle Position and Stitch Length Adjustment

Adjusting Needle Drop Position

How to move the needle left or right for precise stitch placement.

Adjusting Stitch Length

How to decrease or increase the stitch length for desired results.

Variety of Straight Stitches

Straight Stitch Variations

Describes different straight stitch types like Lock-a-Matic, Locking, Triple Stretch, and Stretch stitches.

Zigzag Stitch

Adjusting Zigzag Width and Length

Guides on modifying stitch width and length for zigzag stitches.

Zigzag Stitch Width and Length Control

Specific steps to change stitch width and length for zigzag sewing.

Overcasting with Zigzag Stitch

Variety of Overcasting Stitches

Overcasting Stitch Types

Details different overcasting stitches like Tricot, Knit, Double Overedge, and Overlock.

Blind Hem Stitch

Adjusting Needle Drop Position for Blind Hem

Zipper Sewing

Attaching the Zipper Foot

Instructions on attaching the zipper foot for sewing zippers correctly.

Zipper Sewing Procedure

Step-by-step guide for sewing zippers, including fabric preparation and needle/tension settings.

Completing Zipper Sewing

Final steps for zipper sewing, including basting, removing stitches, and finishing the seam.

Quilting

Regular Quilting with Quilting Bar

How to use the quilting bar with the zigzag foot for regular quilting.

Variety of Buttonholes and Their Uses

Buttonhole Types

Describes various buttonhole types like Sensor, Auto, Round End, Keyhole, Stretch, and Knit buttonholes.

Sensor Buttonhole

Sewing a Sensor Buttonhole

Step-by-step guide to sew sensor buttonholes using the automatic buttonhole foot.

Completing the Sensor Buttonhole

Final steps for sensor buttonholes, including bartacking, cutting, and opening.

Corded Buttonhole

Adjusting Buttonhole Settings

Automatic Buttonhole

Automatic Buttonhole Procedure

Steps for sewing automatic buttonholes, including marking and positioning.

Completing Automatic Buttonholes

Details on sewing multiple automatic buttonholes and cutting the opening.

Button Sewing

Darning

Darning Techniques

How to sew shorter darns, same size darns, and adjust darning evenness.

Tacking

Eyelet

Basting

Satin Stitches

Satin Stitch Adjustments

Covers adjusting width, length, and elongation for satin stitches.

Programming Stitches

How to program pattern combinations, use cursor keys, delete, mirror, and save files.

Locking Stitches and Pattern Combinations

Sewing single patterns with locking stitches and creating pattern combinations.

Elongation Sewing

Mirror Image Pattern Combinations

Decorative Stitches

Shell Tuck Stitch

Instructions for creating shell tuck stitches on various fabrics.

Applique Sewing

Programming French Knots

Sewing Pattern Combinations

Individual Pattern Adjustment

Editing Programmed Patterns

Modifying Programmed Patterns

Guides on deleting and inserting patterns within programmed sequences.

Program Check

Twin Needle Sewing

Twin Needle Setup and Threading

Instructions for setting up and threading the machine for twin needle sewing.

Monogramming

Monogramming Features and Keys

Overview of monogramming options, letter keys, cursor control, saving, and size adjustments.

Programming a Monogram

Step-by-step guide to programming monograms using letters and symbols.

Saving and Opening Files

Saving Your Designs

Instructions on saving programmed patterns to memory or PC card.

Assigning File Names to Designs

How to name saved files, including character limits and overwriting existing files.

Correcting Distorted Patterns

Adjusting Stretch Stitch Patterns

Guides on using the Feed Balancing Dial to correct distorted stretch stitch patterns.

Embroidery Mode

Embroidery Hoops and Templates

Details on using Embroidery Hoops A and B, including their templates and features.

Embroidery Setup and Stabilizers

Covers stabilizer types, thread tension, pressure dial, and needle selection for embroidery.

Setting Fabric in Embroidery Hoop

Attaching Embroidery Hoop

Thread Holder Setup

Instructions for using the thread holder to prevent sewing on the needle thread.

Embroidery Mode Selection

Using Built-in Embroidery Designs

Design Selection and Control

How to select designs, manage colors, skip parts, and adjust hoop position.

Embroidery Operation Controls

Using trace key, stitch back/forward, jog keys, return carriage, and understanding screen information.

Starting to Sew Embroidery

Monogram Embroidery

Font Selection and Monogramming

Choosing fonts and creating monograms using various keys and options.

Monogramming Input and Customization

Detailed steps for entering letters, numbers, and symbols for monograms.

Monogram in Gothic Style

Sewing Monograms

Instructions on sewing monograms, adjusting hoop position, and sewing vertically.

Monogram Editing

Deleting and Inserting Monogram Letters

Procedures for correcting monograms by deleting or inserting letters.

PC Card Designs

PC Card Management

How to insert, eject, and select designs from PC cards.

Card Reader 10000

Using the Card Reader

Connecting and using the Card Reader 10000 to access designs from memory cards.

Editing Mode

Editing Screen and Hoop Selection

Accessing the editing screen and selecting the appropriate embroidery hoop.

Selecting Patterns for Editing

The Patterns from the built-in designs, monograms, PC cards and Memory Cards can be edited.

Moving Patterns and Selecting Hoops

How to move patterns on screen and select different hoop sizes for editing.

Editing Pattern Transformations

Adjusting pattern size, flipping, deleting, rotating, and magnifying designs.

Saving Edited Designs

Assigning File Names to Designs

Steps for naming saved embroidery designs, including handling memory space and duplicate names.

Combining Designs and Monograms

Sewing Combined Designs

Instructions for sewing combined embroidery designs and monograms.

Opening and Deleting Saved Files

Managing Saved Embroidery Files

How to open saved files and delete unwanted ones.

On-screen Help

Care and Maintenance

Cleaning Hook Race and Feed Dog

Detailed steps for cleaning the machine's hook race and feed dog area.

Replacing the Light Bulb

Instructions for safely replacing the sewing machine's light bulb.

Troubleshooting

Common Sewing Problems and Solutions

Guides to diagnose and resolve common issues like noisy machine, thread breaks, and skipped stitches.

Stitch Chart

Design Chart

Related product manuals

Janome MEMORY CRAFT 9000

9 pages

Janome Memory Craft 9850

138 pages

Janome MEMORY CRAFT 9700

110 pages

Janome Memory craft 9900

137 pages

Janome Memory Craft 9450QCP

124 pages

HORIZON Memory Craft 9480 QC PROFESSIONAL

164 pages

Janome Memory Craft 500E

76 pages

Janome memory craft 7500

97 pages

Janome Memory Craft 350e

52 pages

Janome Memory Craft 400E

68 pages

Janome MEMORY CRAFT 4800