22 | www.Janome.com
Tension assembly split bolt
Check #2
thread tension.
Check #3
Tool(s): 2 mm handle Allen
NOTE
1. Loosen the set screw under the top tension assembly a
2.
3.
when pushed and released.
4.
5. Replace the top tension into the machine. Ensure that
Set Screw
E
To replace the take-up spring
1. Remove the tension parts and split bolt.
2.
3.
4.
5.
NOTE
6. Reinstall the top tension parts on the split bolt.
7.
 IMPORTANT
at 12 o’clock,
in its rest
To Next Page
Loading...
