42 | www.Janome.com
Tool: 2 mm handle hex wrench
NOTE
close, it will not be possible to set needle
distance correctly.
1.
2. Rotate the basket down in order to properly set
the needle distance. See To rotate the bobbin-
case basket above.
3.
with the needle.
both set correctly
4. Loosen the two screws on the hook base.
NOTE
and unusable.
Hook screws
5. Loop Li and
Needle Distance
6.
7.
NOTE:
Too much needle distance may cause skipped
both set correctly
8.
To Next Page
Loading...
