Janus FM-200 Sv Series - Page 40

Page: 26
FM-200® OPERATION, DESIGN, & SERVICE MANUAL
Revision F
Document # DOC102
Issued: February 1, 2009
Revised: 11-Nov-2011
40YE
Section 2 System Description and Components
Figure 2.4.3d Suggested Manifold Congurations for 900 lb Cylinders
6” (150 mm) NPT Pipe Cap
6”
(152 mm)
28”
(711 mm)
40” (1016 mm)
6” (150 mm) Sched. 40 Pipe
1/4” (8 mm) SQ. HD. Pipe Plug
3” (80 mm) Grooved
Cylinder Connection
6” (150 mm)
Grooved Outlet
6”
(152 mm)
28”
(711 mm)
28”
(711 mm)
68” (1727 mm)
6” (150 mm) Sched. 40 Pipe
3” (80 mm) Grooved
Cylinder Connection
1/4” (8 mm) SQ. HD. Pipe Plug
6” (150 mm) NPT Pipe Cap
6” (150 mm)
Grooved Outlet
Figure 2.4.3c Suggested Manifold Congurations for 600 and 900 lb Cylinders
28”
(711 mm)
28”
(711 mm)
6”
(152 mm)
68” (1727 mm)
4” (100 mm) Sched. 40 Pipe
1/4” (8 mm) SQ. HD. Pipe Plug
4” (100 mm) NPT Pipe Cap
3” (80 mm) Grooved
Cylinder Connection
4” (100 mm)
Grooved Outlet
1/4” (8 mm) SQ. HD. Pipe Plug
4” (100 mm)
Grooved Outlet
4” (100 mm) NPT Pipe Cap
3” (80 mm) Grooved
Cylinder Connection
28”
(711 mm)
40” (1016 mm)
4” (100 mm) Sched. 40 Pipe
6”
(152 mm)