Janus FM-200 Sv Series - Page 61

Page: 47
FM-200® OPERATION, DESIGN, & SERVICE MANUAL
Revision F
Document # DOC102
Issued: February 1, 2009
Revised: 11-Nov-2011
40YE
Sample Mv Series Single Cylinder Equipment Order List
Quantity P/N Description
1 18526-350 Cylinder Assembly, FM-200, 420 lb
350 lbs FM200AGENT FM-200® Agent
1 18535 Bracket Assembly, Cylinder, 16”
1 18481 Electric Valve Actuator
1 17001 Manual Valve Actuator
1 18772 Gauge Assembly, Pressure, FM-200
1 18775 Switch Assembly, Low-Pressure Supervisory
1 18555 Coupling, Grooved, 2” (50 mm)
1 18551 Elbow, Grooved, 2” (50 mm)
1 18474 Nipple, Grooved x MNPT, 2” (50 mm)
As Required Various Discharge Nozzles
1 18773 Switch, Discharge Pressure, w/ 1/2” (15 mm) Conduit Connection
1 18489 Sign, Warning, Exit, Clean Agent
1 18770 Sign, Warning, Entrance, Clean Agent
Sample Mv Series Two Cylinder Equipment Order List (Manifolded)
Quantity P/N Description
2 18525-200 Cylinder Assembly, FM-200, 250 lb
400 lbs FM200AGENT FM-200® Agent (200 lbs per Cylinder)
2 18535 Bracket Assembly, Cylinder, 16”
1 18481 Electric Valve Actuator
1 17001 Manual Valve Actuator
2 18772 Gauge Assembly, Pressure, FM-200
2 18775 Switch Assembly, Low-Pressure Supervisory
2 18555 Coupling, Grooved, 2” (50 mm)
2 18551 Elbow, Grooved, 2” (50 mm)
2 18474 Nipple, Grooved x MNPT, 2” (50 mm)
1 17019 Pneumatic Valve Actuator
1 18560
Valve, Check, 1/4” MNPT x 1/4” JIC Male (8 mm x 8 mm), Brass
Pilot Actuation Check Valve
1 18649 Hose, Flex, 3/16”, 1/4” (8 mm) JIC Female - 24” (610 mm)
1 18625
Adapter, 1/4” MNPT x 1/4” JIC Male (8 mm x 8 mm), Brass
Male NPT Adapter
1 18611
Tee, 1/4” FNPT x 1/4” MNPT (8 mm x 8 mm), Brass
Pilot Actuation End Line Tee
1 10173 Vent Check
As Required Various Discharge Nozzles
1 18773 Switch, Discharge Pressure, w/ 1/2” (15 mm) Conduit Connection
2 18546 Valve, Check, 2” FNPT (50 mm)
1 18489 Sign, Warning, Exit, Clean Agent
1 18770 Sign, Warning, Entrance, Clean Agent
Section 3 System Design