Description and Operation
Operation
Software Installation
17www.javad.com
• Advanced Multipath Reduction
• Two event markers
• Two 1 PPS timing strobes
• 1 PPS level converter
• CAN port
• External Reference Frequency Input/Output
• External Reference Output Frequency converter
• IEEE1588 Master Clock (G3TAJT only)
• Up to 3 high-speed RS232 serial ports
• High-speed RS232/RS422 serial port
• USB port
• Ethernet
• WAAS/EGNOS/MSAS (SBAS)
1.4. Operation
1.4.1. Software Installation
Use the NetView software program for configuring and maintaining the receiver. This software is
available on the JAVAD GNSS website. NetView™ is a comprehensive Windows® software product
designed for controlling GNSS receivers developed by JAVAD GNSS.
Note: Refer to the NetView Software Manual for full details on installing and using NetView Software.
1. If downloading the program from the website, extract the program files into a folder on your hard
drive.
2. Navigate to the location of the NetView program and double-click the Setup.exe icon.
3. Follow the on-screen installation instructions. Click Install to continue. Keep the default installa-
tion location or select a new location.
4. If desired, create a shortcut on the computer’s desktop for quick access to NetView.
To Next Page
