Javo Plus M2.0 - Technical Specifications and Tolerances; Type Plate

User manual for Javo Plus M2.0
Version 22300779
page 4 / 27
1. Technicalspecicationsandtolerances
Thismachineisintendedonlyforautomaticallyllingpotswithsubstrate.Aholeisthendrilledinthesubstrate,
readytoreceiveaplantonthetake-offconveyor.Thismachineisintendedonlyfortheprocessingofpots,
substratesandothermaterialsspeciedinthismanual.Themachine'sfunctionisexplainedinthe“Operating
principle” Section.
This machine may be used only within the specications and tolerances laid down in the order, assembly
drawing and this manual. Nobels BV cannot accept any responsibility for this machine when it is used outside
these limits.
This machine is intended only for products as agreed in the order conrmation. To guarantee the correct
functioning of this machine, only products within the specications and tolerances as laid down in the order
conrmation may be used.
Do not use this machine for purposes other than those for which Nobels BV designed the machine. Use for other
purposes may result in damage and in hazards to the operator and the operator's surroundings.
This machine bears CE marking. When several machines are installed in one production line then the entire
production line must bear appropriate CE marking before this machine may be commissioned. This machine
may not be commissioned until CE marking has been applied to the production line.
Specications
Power supply 400 Volt 50Hz 3~+N+ PE / 220 Volt 60Hz (or in consultation)
Connection to power supply 16A 5 pole
Power consumption 5.5kW
Switched plug box 1x 16A 5 pole
Weight Approx. 1750 kg
Height of take-off conveyor 805 mm
Max. speed 3100 pots per hour (50Hz)
Min. speed 1240 pots per hour (15 Hz)
Minimum pot diameter 10 cm
Maximum pot diameter 32 cm (10 liters)
Number of potholders 16
Volume of soil bin 1100 liter (1.1 m³)
Drill holder (Motor shaft 19 mm) Drill shaft 14 mm (through 15 cm drill)
Operating the machine Separate control unit with stop/start/emergency stop/reset
Elevator frequency controller Standard (controls on electrical cabinet)
Pot track frequency controller Standard (controls on electrical cabinet)
Wheels Heavy-dutybearingwheelsatfront,castorsatback
Cuttings plate Standard adjustable in height
Circulation rail Edging and rail at each position removable. Rail divisible
Year of manufacture See type plate.
Type of product Asagreedintheorderconrmation
Compressed air (optional) 6 Bar; 250 nl/min.
1.1. Typeplate
The type plate is mounted on the switchbox door