14
3. Using your video recorder
Turning the recorder ON and OFF
1. Press the POWER button for 2 seconds to turn ON video recorder.
2.
Press the POWER button again to turn OFF the recorder.
To save battery power, the recorder automatically turns off after a short
period of time if no button is pressed. Press the POWER button to power
the camera back ON. You can change the power-OFF time by setting the
function [Power Save] in the Setup menu
Change the MODE of the recorder
Your video camera has three selectable modes: Video, Capture, and
Playback mode. Press Mode button to change modes sequentially.
1. Press the POWER button and the camera will become active and set
in Video Recording Mode.
2. Press the MODE button once to select the Capture mode for taking
To Next Page
Loading...
