16
Taking still images
1: Turn ON the video camera.
2: Press the MODE button to set the video camera to capture mode,
the icon
appears on the LCD screen.
3: Frame the scene or subject in LCD screen. To quickly change
resolution setting press LEFT button.
4: Hold the video recorder steady and press the SHUTTER/ OK button to
take a picture.
• The number displayed on the LCD screen will decrease with each
picture taken.
• No more pictures can be taken if the “Memory Full” message
appears on the LCD screen – replace the SD card or download
stored images into the computer.
• Make sure that your fingers do not cover the lens while recording
video or taking still images.
• Do not remove the memory card or batteries when camera is
saving the image, otherwise the data will be damaged.
To Next Page
Loading...
