17
Using the Self-timer and Burst snapshot
When the Self-timer is set and activated, the camera will auto-take a
picture after the selected delay time. Use the burst snapshot to take
pictures continuously.
1: Turn the power ON, and set the video camera to the Capture mode.
2: Press the RIGHT button to select the Self-Timer options; please note
icons and information displayed on left upper corner of the LCD screen.
2 seconds: The recorder will take picture with 2 seconds delay
10 Seconds: The recorder will take picture with 10 seconds delay
Continuous: Press the SHUTTER/ OK button once to take three
consecutive pictures.
3: Press the SHUTTER/ OK button to take picture.
• You can also set the self-timer and burst snapshot from the Capture
Menu. See the details on page 21.
To Next Page
Loading...
