22
MENU button to display the menu.
2: Press the RIGHT button to select
[Setup].
3: Use the UP or DOWN button to select an item.
4: Press the SHUTTER/ OK or RIGHT button to enter the submenu.
5: Use the UP or DOWN button to select the desired item.
6: Press the SHUTTER/ OK button to confirm the setting.
7: Press the MENU button to close the menu.
Menu item Function
Sounds There are four settings to choose:
[Shutter]: Set the shutter sound on or off by pressing
the RIGHT button.
[Start-up]: Set the start-up sound on or off by pressing
the RIGHT button.
[Beep]: Set the operation sound on or off by pressing
the RIGHT button.
[Volume]: Adjust the sound volume by pressing the
RIGHT button.
Power Power (also Light) Frequency should be set to 60Hz or
To Next Page
Loading...
