Troubleshooting
15
Authentics L16
Problem Solutions
My JBL Authentics L16 does not turn ON • Make certain the AC power cord is plugged into a live
outlet.
• Check to see whether the outlet is switch-controlled.
No sound from any speaker • Contact your local JBL service center.
Audio sources sound distorted • If the distortion is heard in the Phono/RCA input
source, make sure the MM/MC/Line switch is set to the
correct setting.
• If the distortion is heard in the Aux-in source, check to
make sure the connection is secure.
Amplifier turns ON, but no audio from one or more
channels
• Check input connections.
• Check the settings on your preamp, processor or
controller.
Troubleshooting
If your JBL Authentics L16 system is not performing the way you think it should, check if the problem is covered in this section
before calling your dealer or contacting a JBL representative.
To Next Page
Loading...
