33
OTHER FUNCTIONS (CONTINUED)
Surround Mode Chart
MODE FEATURES
DOLBY DIGITAL Available only with digital input sources encoded with Dolby Digital data. It provides up to five separate
main audio channels and a special dedicated Low Frequency Effects channel.
DTS Available only with digital input sources encoded with DTS data. Available on special DVD, LD and
audio-only discs, DTS provides up to five separate main audio channels and a special dedicated low
frequency channel.
PRO LOGIC The standard mode for analog surround sound decoding. It uses information encoded in a two channel
stereo recording to produce four distinct outputs: Left, Center, Right and a Mono Surround channel. Use
this mode for accurate reproduction of programs bearing the Dolby Surround, DTS Stereo, UltraStereo
or other “Surround” logos. Surround-encoded programs include videocassette, DVD and LD movies, TV
and cable programs, radio programs and audio CDs. Dolby Pro Logic processing may also be used to
provide a pleasing surround effect with some stereophonic source material that does not carry surround
encoding.
SURROUND This mode turns off all surround processing and presents the pure left and right channel presentation
OFF (STEREO) of two channel stereo programs.
Available Surround Modes and Defaults
Source Stereo Dolby Pro Logic 5.1 Ch Stereo Downmixed
DVD/CD Dolby Digital Option Default Option
CD/MP3 Default Option
VCD Option Default
Tuner/AUX Default Option
TV Option Default
To Next Page
Loading...
