Need help?Do you have a question about the JBL EON 208p and is the answer not in the manual?
General| Power Output | 300W |
|---|---|
| Frequency Response | 60 Hz - 20 kHz |
| Max SPL | 121 dB |
| Woofer Size | 8" |
| Mixer Channels | 8 |
| Bluetooth | Yes |
| Type | Portable PA System |
| LF Driver | 1 x 8" Woofer |
| EQ | 2-band EQ per channel |
| Enclosure Material | Polypropylene |
| HF Driver | 1 x 1" tweeter |
| Inputs | 1 x 1/8" stereo |
Instructions for cleaning the EON208P system with a dry cloth and avoiding moisture.
Guidelines for safely mounting the EON208P speakers on stands or poles, ensuring stability and preventing trip hazards.
Warning about potential permanent hearing damage from excessive sound pressure levels (SPL) above 90 dB.
Information regarding device compliance with FCC rules, including conditions for operation and potential interference.
Step-by-step guide for unboxing, detaching speakers, and initial setup of the EON208P system.
Introduction to the EON208P powered mixer, explaining its function and basic operation for audio sources.
Details on mono mic/line inputs, including controls like treble, bass, reverb, and volume selection.
Instructions on how to pair and stream audio wirelessly from a Bluetooth-enabled device to the EON208P.
Explanation of stereo inputs (CH 5/6, CH 7/8) using 1/4" phone, RCA, and 3.5mm jacks for various audio sources.
Details on EON208P's stereo output options including speaker, monitor, headphone, and subwoofer outputs.
Explanation of the master volume control and the yellow LED indicating maximum output levels.
To Next Page
