To Next PageTo Next Page
Need help?Do you have a question about the JBL MR-5 and is the answer not in the manual?
General| Type | CD Player |
|---|---|
| Brand | JBL |
| Model | MR-5 |
| Supported Discs | CD, CD-R, CD-RW |
| Frequency Response | 20Hz - 20kHz |
Notes on connecting speakers and power for installation.
Ensure proper connection of the black wire to a grounding point.
Model suitability for negative ground systems only.
Steps for connecting speaker and power cables safely.
How to perform a manual reset of the microprocessor.
Advice on cooling, CD care, and handling.
Advice on choosing mounting location and hardware.
Guide for adjusting the unit's mounting angle.
Illustration of how to install the unit in a dashboard.
How to switch between Radio, CD, and AUX modes.
Controls for playing and pausing the CD.
How to select tracks on a CD, fast forward/rewind.
Function to preview the first 10 seconds of each track.
How to repeat a specific track on the CD.
How to play CD tracks in a random sequence.
Instructions for replacing blown fuses.
Caution regarding the use of correct amperage fuses.
How to select radio bands (FM1, FM2, FM3, AM1, AM2).
Methods for tuning radio stations manually or via seek.
How to store favorite radio stations into memory.
Automatically stores the strongest stations in memory.
Function to scan for strong radio broadcasts.
How to recall memorized radio frequencies.
Button to eject the CD from the player.
Knob for adjusting volume, bass, treble, balance, fader.
Button for selecting various electronic functions.
Button used to detach the front panel.
Button to select between Radio, CD Player, and AUX input.
Button for selecting equalizer modes (Flat, Classics, Pop, Rock).
Button to turn the unit on and off.
Button for scanning radio frequencies.
Button for band selection and loudness control.
Buttons for tuning radio or advancing CD tracks.
Controls for CD playback and radio preset 1.
Controls for CD intro scan and radio preset 2.
Controls for CD repeat play and radio preset 3.
Controls for CD random play and radio preset 4.
Button for radio preset 5.
Button for radio preset 6.
Button to mute the audio output.
Button to switch between time and frequency display.
Auto Program Scan button.
How to turn the unit on and off.
Button to cycle through audio control options like volume, bass.
Adjusting the audio volume using the spindle knob.
Adjusting the bass level of the audio.
Adjusting the treble level of the audio.
Adjusting the balance between left and right speakers.
Adjusting the fader between front and rear speakers.
Settings for beep feedback, initial volume, and region.
