JBL SB210 - System #5: 4 pcs Control 25 AV & SB-210

Satellite
Outputs
Left Right
System #5 in Mono
SPL (at 20 Feet):
94 dB Continuous (peaks of 104 dB)
MODULE SETTINGS:
Stereo / Mono Selector: Mono
4-Ohm / 8-Ohm Selector: 4-Ohms
Control SB-210 with
MTC-210-SAT Crossover Input Module
Control 25AV
(8 ohm setting)
Control 25AV
(8 ohm setting)
Control 25AV
(8 ohm setting)
Control 25AV
(8 ohm setting)
From
Power
Amp
Left/Mono
Input
Terminals
System #5
4 pcs Control 25AV & Control SB-210
Application
Medium volume, high-fidelity music reproduction where 4
satellite speakers are needed to cover the area.
Max Continuous Average SPL (at 20 feet)
94 dB (with peaks of 104 dB)
Max Output Balance
e subwoofer has higher maximum output capability than
the satellite speakers and the output capability can be further
boosted by placing the subwoofer at a boundary junction or
corner. is system has the capability of being utilized for
applications where the bass will be EQ’d substantially higher
than the mids and highs. e system also works fine for flat-
response applications.
4 Ohm / 8 Ohm Setting
4 Ohms
Stereo/Mono Capability
Either setting can be utilized
Connection
Mono Operation – Connect input to the LEFT input termi-
nal. Put Stereo/Mono header into MONO position. Con-
nect 2 pcs of Control 25AV to each satellite output (LEFT
and RIGHT). Do NOT connect all 4 satellite speakers to
a single satellite output.
Stereo Operation – Connect left and right inputs to the
LEFT and RIGHT input terminals. Put Stereo/Mono
header into STEREO position. Connect 2 pcs of Control
25AV to each of the Satellite Outputs (LEFT and RIGHT)
Application Notes
Balance -- e subwoofer has higher maximum output
capability than the satellite speakers and the output
capability can be further boosted by placing the subwoofer
at a boundary junction or corner. is system has the
capability of being utilized for applications where the bass
will be EQ’d substantially higher than the mids and highs.
e system also works fine for flat-response applications.
Variations -- Control 25 speakers can be utilized instead of
Control 25AV for a more cost-effective system, resulting in
slightly lower overall fidelity, but 1 dB louder SPL.
Connection Diagrams
14 15