Dipper Ram - Replacement (cont’d)
6 Install the pin, bolt and nuts.
Note: Stroke the ram to release entrapped air. After releasing
the air, check for oil leakage.
!!
WARNING
Metal Splinters
You can be injured by flying metal splinters when driving
metal pins in or out. Use a soft faced hammer or drift to
remove and fit metal pins. Always wear safety glasses.
INT-3-1-3
73 - 5
Section E Hydraulics
9803/6410
Section E
73 - 5
Issue 1
Hydraulic Rams
To Next Page
Loading...
