Dipper Ram - Replacement (cont’d)
2 Install the pin, bolts and nuts.
!!
WARNING
Metal Splinters
You can be injured by flying metal splinters when driving
metal pins in or out. Use a soft faced hammer or drift to
remove and fit metal pins. Always wear safety glasses.
INT-3-1-3
3 Install the grease tube.
4 Connect the hoses.
5 Hoist the ram to align the piston rod eye end with the
dipper pin position.
73 - 4
Section E Hydraulics
9803/6410
Section E
73 - 4
Issue 1
Hydraulic Rams
To Next Page
Loading...
Need help?
General
