Dismantling (cont’d)
14 Loosen and remove the two plugs 215. Remove ‘O’-ring
219 from each plug 215 and discard.
15 Take the two steel balls 216 out of body 212.
16 Unscrew one of the sleeves 202 from body 212.
Remove and discard ‘O’-ring 208 and the two back-up
rings 211 from sleeve 202.
Remove and discard ‘O’-ring 209 and the two back-up
rings 217 from body 212.
8 - 5
Section F Transmission
9803/6410
Section F
8 - 5
Issue 1
Traction Motor
To Next Page
Loading...
