jcb RTFL 940 - Page 105

Routine Maintenance
Service Schedules
95 95
9811/5700-7
Tyre Pressures/Condition - Check

Tightness of Wheel Nuts
(8)
- Check

Rear Hub Bearings (2WD) - Grease

Rear Hub Bearings (2WD)
(6)
- Check

Steer Axle Movement/Shimming
(6)
- Check

Steering Pivots and Track Rods - Check

Steer Axle Pivots and Linkages - Grease

Track Rod Ends -Grease

Propeller Shafts, Drive Shafts and Universal
Joints
- Security/Grease

Wheel Alignment - Check

HYDRAULICS
System for Leaks - Check

Oil Level - Check

Oil
(6)
- Change and Clean
Strainer

Oil Filter - Change

Hoses - Damage or Leaks - Check

Pipework - Damage or Leaks - Check

Rams - External Leaks - Check
 
Rams - Chrome Condition - Check
 
Hydraulic Oil, Top End of Mast Lift Ram - Top -up

BRAKES
Brake System Fluid Level - Check

Brake System Fluid
(6)
- Change

Park Brake - Check and Adjust

ELECTRICS
Battery Electrolyte Level - Check

Wiring for Chafing/Routing - Check

Battery Charge Condition - Check

Battery Terminals for Condition and
Tightness

BODYWORK AND CAB
Pivot Pins and Bushes - Check and Grease

Operation 10 50
(1)
100
500 1000 2000 6000